AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
Snapmaker lightburn10/7/2023 ![]() You also have the flexibility to operate Snapmaker 2.0 using third-party software like LightBurn, ArtCAM, Aspire, FreeCAD, Fusion 360, and Vcarve. You can then send the generated G-code to the controller via WiFi or flash drive. Luban has a smooth interface that allows you to switch between 3D printing, laser engraving, and CNC carving environments.įor various operations, Luban uses the following file formats to generate G-codes. ![]() It requires the system to have at least 4GB of RAM to run smooth. You can install it on Windows 8/10, macOS, and Linux operating systems. It's open-source software that's available free for anyone to use. Snapmaker 2.0 works with their own software called " Luban". It takes about 15 minutes to swap the tool head and the workbed. When you switch the tool head, you also need to swap the workbed, which can take a bit of time. It can be a bit troublesome if you want to switch between the modules frequently. Its modular design makes it easier to use and switch between different modules for 3D printing, laser engraving, and CNC carving operations. The rigidity of a laser or 3D printing machine does not need to be very high.īut, for a CNC, you need good rigidity to handle all the vibrations and stress when the tool is pressed against the material, and the Snapmaker 2.0 can handle those well. Its frames and parts are made of anodized aluminum and have an all-metal build.Īll the linear motion components, including the stepper motors and the driver, are housed within sturdy linear modules. The first thing you will notice about Snapmaker 2.0 is its sleek design and minimalistic look. The 350 model has the largest build volume and lets you make things that are around 12.5" x 13.75" x 13". Each of them has a varying footprint and work area. Snapmaker 2.0 is available in three different sizes A150, A250, and A350.
0 Comments
Read More
Leave a Reply. |